#Sixtyforce mayflash adaptor how to
#Sixtyforce mayflash adaptor install
#Sixtyforce mayflash adaptor drivers
#Sixtyforce mayflash adaptor full
#Sixtyforce mayflash adaptor pro

To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds.

Connect the adapter into any spare USB port on your Nintendo Switch, PS3, NEOGEO mini, PS Classic or PC system.

Just turn on your PC if you use the adapter on your PC system.

Connect the Nintendo Switch, PS3, NEOGEO mini or PS Classic to a TV.

Turn on your Nintendo Switch, PS3, NEOGEO mini, or PS Classic system.

#Sixtyforce mayflash adaptor pro

The LED indicator blinks slowly in blue for the PS3 or PC Din put system mode, the Nintendo Switch mode is red, the PC Xinput mode is green, the Switch Pro mode is purple,NEOGEO mini mode is yellow,PS Classic mode is cyan.

Press the button shortly to SYNC the controllers and the adapter.

Used for the modes switching and Bluetooth pairing. To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system once you switch the adapter to the Switch Pro mode Button on the side of the adapter

LED Indicator lights up: The Bluetooth has been paired.

LED Indicator blinks quickly: The Bluetooth is syncing.

LED Indicator blinks slowly: The Bluetooth is not connected yet.

LED Indicator in Yellow: NEOGEO mini mode.

LED Indicator in Purple: Switch Pro mode.

LED Indicator in Green: PC Xinput System mode.

LED Indicator in Red: Nintendo Switch System mode.

LED Indicator in Blue: PS3 or PC Dinput System mode.

Vibration may not always work properly due to bugs in the driver.

#Sixtyforce mayflash adaptor install

You also need to install this driver, but the driver will only work on macOS 10.9 and earlier. You need the Xbox 360 Wireless Receiver for Windows if your controller didn't come with it. You need to install this driver for the controller, but the driver will only work on macOS 10.9 and earlier. Vibration will not work.ĭoes not work with controller packs. Vibration will not work.Ĭonnect with Bluetooth or USB. Ĭonnect with a USB cable and press the PS button to turn it on. Works with the Wii Classic Controller and Wii Classic Controller Pro. (Rumble Pack, Memory Pack, etc.)Ĭonnects 2 controllers. (There's no Intel driver.)Ĭonnects 2 controllers. This controller will only work in 'analog' mode. The following is a list of controllers that have been tested with sixtyforce:Ī Rumble Pack must be inserted in the controller to use vibration. (Because it doesn't handle controller packs.) * The May Flash N64 Controller Adapter which can connect two controllers, but does not work with vibration. * The Adaptoid, which fully supports vibration using a Rumble Pack, but unfortunately is no longer available to buy new. Three USB controller adapters have been tested with sixtyforce and work really well:

#Sixtyforce mayflash adaptor how to

How to connect a real N64 controller to your Mac Note: One funny side-effect of the emulation is: if the emulation runs slow, the vibration effects will also run in slow-motion. (The checkbox should be enabled by default.) You will know a controller supports vibration if you see a checkbox called 'Vibration' when that controller is selected in the preferences. you enable vibration for the controller in the preferences you set sixtyforce's virtual controller to the Rumble Pack in the Options menu

you're using a controller that supports vibration (also sometimes called 'force feedback') on macOS Sixtyforce has built-in vibration support on some controllers, but you won't feel it unless: The more you decrease the analog sensitivity, obviously the less sensitive your controller becomes, so you should decrease it in very small amounts until the control feels right. If your controller seems overly sensitive, try decreasing the 'analog sensitivity' for the controller in the preferences. If this happens you'll still be able to use your controller, but you'll lose nearly all of your controller's sensitivity!

#Sixtyforce mayflash adaptor full

Why is this a problem? Third party USB controller software can interfere with sixtyforce's full analog support. Disable any software such as USB Overdrive or GamePad Companion, before using sixtyforce. Other USB controller software may interfere with sixtyforce's built-in controller support. If a controller doesn't work with sixtyforce, check to with the manufacturer to see if a driver is available.Ĭonfiguring your controller for the best performance

#Sixtyforce mayflash adaptor drivers

Note: Many Windows USB controllers do not work on macOS because there are no drivers available.

Sixtyforce has built-in support for HID USB game controllers with full analog control, auto-calibration and vibration.